Meet Our Power Station Estimation Tool – Free, Fast, and Simple

Evergreen Off-Grid just launched a free tool that takes the guesswork out of picking a portable power station. Tell it what you want to run—lights, laptop, mini fridge, router, CPAP, fans, even pumps—and it will estimate your daily energy (Wh), your peak load (W), and suggest power stations that actually fit your needs.

Whether you’re prepping for power outages, kitting out a camper, or planning an off-grid workstation, this makes sizing your power station simple.

What the calculator does (in 30 seconds)

  • Estimates watts automatically if you don’t know them (based on common devices and typical duty cycles).

  • Calculates Daily Wh, Estimated Peak W, and Required Battery Capacity for the number of days you choose.

  • Recommends popular units across brands like Jackery, EcoFlow, and Anker that meet both energy and inverter requirements.

  • Works great on mobile and desktop—no sign-in needed.

⚠️ Affiliate note: Product links are affiliate links. As an Amazon Associate, we may earn from qualifying purchases. Thank you for your support.


How it works

  1. Set your days of autonomy (e.g., 1–3 days with no charging).

  2. Choose a Design Margin (extra headroom for system losses and real-world use).

  3. Add your loads: device name, quantity, hours/day. If you leave “Watts” blank, the tool will make a smart estimate for you.

  4. Click Calculate & Recommend to see your system requirements and a short list of matching power stations.

What the key numbers mean

  • Daily Wh: The total energy your devices consume in a day.

  • Peak Load (W): An estimate of the highest power you’ll pull at once (useful for inverter sizing).

  • Required Capacity (Wh): What your battery should store, adjusted for typical conversion/usable-capacity losses plus your chosen safety margin.


A quick example

Let’s say you want to cover the basics for a day:

  • LED lights (4 LEDs, 5 hrs/day) → ~200 Wh

  • Laptop (1, 4 hrs/day) → ~240 Wh

  • Mini fridge (24 hrs/day, ~50% duty) → ~840 Wh

  • Wi-Fi router (24 hrs/day) → ~288 Wh

Daily total ≈ 1,568 Wh.

For 1 day, after accounting for typical inverter/battery losses and a +10% safety margin, the tool recommends a battery around 2,130 Wh.

Estimated peak power for these loads is modest (about ~200 W with margin), so most mid-size stations are fine on inverter power.

Want 2 days without recharging? Roughly 4,260 Wh required. The tool updates this instantly as you change days or loads.


Who this helps

  • Home backup: Keep essentials running during outages—lights, network, fridge, medical devices.

  • Van/RV & camping: Dial in a right-sized solution so you don’t overbuy or run short.

  • Remote workstations: Laptops, monitors, routers, and a fan—done.

  • Small tools & pumps: Check if surge/starting loads push you into a higher-power inverter.


Pro tips for better results

  • Nameplate is king: If your device lists watts (W) or volts × amps (V×A), type that in for best accuracy.

  • Duty cycles matter: Fridges, freezers, and ACs don’t run 24/7; the calculator already accounts for typical on/off behavior.

  • Think “what runs at the same time?” That’s what drives inverter wattage, especially with appliances that have high startup surges.

  • Use the Design Margin: +20–30% is conservative if you’re traveling or in cold climates, or if your loads are variable.


What the recommendations mean

When you hit Calculate, you’ll get a short list of portable power stations that meet both:

  • Your required battery capacity (Wh), and

  • Your minimum inverter power (W).

We keep this list fresh across a range of brands and sizes so you can compare options quickly.

Tip: If any device has a high surge (well pumps, power tools), prioritize a unit with adequate continuous W and strong surgecapability. Manufacturers list this in the specs.

FAQ

Do I need to know the wattage of every device?

No. If you leave watts blank, the calculator uses typical values. For uncommon gear, check the label or manual for best results.

Can I include solar charging?

This version sizes for a fixed number of days without charging. If you’ll add solar, you can lower “days” or use the results as a conservative baseline.

What about 12V DC devices?

You can enter them as well. If you’re running through the AC inverter, the tool already accounts for typical conversion losses.

Is this a wiring or code compliance tool?

No—this is a planning/estimation tool. Always follow manufacturer instructions and local codes for installation.

Privacy?

We don’t require any login to use the calculator.


Ready to try it?

👉 Open the Power Station Estimation Tool

Practical DIY solar tips, new calculators, and gear picks—about 1–2 emails a month. No spam. Unsubscribe anytime.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Join the conversation! Ask us questions!

Join the conversation! Ask us questions!

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Related articles

About Author

Electrical Engineer

Currently living in Seattle, Washington, Jon Springer is a husband and a father of two. Born and raised in Seattle, he enlisted in the US Coast Guard in October 2001. After a five year tour he enrolled at the University of Washington where he graduated in 2010 with a Bachelor of Science in Electrical Engineering, with a focus in renewable energy.

He’s a professionally licensed electrical engineer in the State of Washington and has served in various roles as a civilian federal employee – first as a Nuclear Engineer with the US Navy, then as an Electrical Engineer with the US Army Corps of Engineers (USACE). He has responded to disasters with USACE after hurricanes in Puerto Rico and Florida and on local USACE flood teams in the Pacific Northwest. He’s passionate about helping people protect themselves and progressing technological solutions to combat the causes of our peril. He has volunteered on local non-profits devoted to providing energy access to underserved communities. When he’s not thinking about engineering he loves to travel and spend time with his family. He also enjoys practicing several disciplines of martial arts and reading old fashioned hard copy books.  

Feature Articles

Recent Comments

No comments to show.